The assortment of floor / pit scales of the Kx-line includes weighing ranges from 600 to 6000 kg with a verificable resolution up to 1x6000 e. The weighing platform sizes vary from 1250x1000 mm to 2000x1500 mm. The hybrid construction - electromagnetic force compensation cell TBrick-Ex and lever arm system - guarantee optimum linearity with slightest corner load tolerances. The individual models are available as stainless steel- respectively as hot galvanized version and can be used in wet or dry areas. Moreover the stainless steel models are certified according the GMP guidelines. Therefore the Kx..T4 product line is extremely well qualified for the chemical- and pharmaceutical industry. All models can be used in hazardous areas of zone 1 in compliance with the guidelines 94/9/EU (ATEX) respectively FM3610.
Electromagnetic force compensation
This technology provides best repeatability with highest resolution.
Software adaptations
The individual possibilities to adjust weighing process-, vibration- and
standstill adapter adapt the weighing system to the environmental
conditions at the place of use.
Update rate of 6 ups
Highest efficiency for dispensing and filling
Internal test- / adjusting weight
During installation, the existing gravitations at different places on earth are considered.
IP-protection
The measuring cell has an IP67-protection and is safeguarded againstpenetration of water and dust.
Type of protection
94/9/EU (ATEX): II 2G EEx ib IIC T4
II 2D IP67 T+55°C
FM Class I,II,III; Division I, Group A-G; T4
Cleanability / Handling
GMP- approved, therefore dedicated for chemical- and pharmaceutical industry.