The stainless steel scales are available in different standard- and free-size dimensions.
They are suitable for loads from 300 kg to 1500 kg, having a standard resolution of 1x3000e.
The low overall height of 35 mm respectively 45mm allows smooth driving via a ramp – a pit installation becomes redundant.
Thanks to new product options and a wide range of accessories, the PUA579 can be very well adapted to your demands.
GMP
The GMP approval allows use in chemical- and pharmaceutical branches where easy cleaning and hygiene are indispensable.
EHEDG
A drive-through scale and its accessories which meet the highest demands regarding hygiene in food industries. *
Strain gauge technology
4 ring load cells guarantee precise weighing results.
Plug n’weigh
The metrological parameters are memorized directly in the weighing platform – the terminal can be exchanged or replaced as desired, also in applications subject to obligatory verification. Cable lengths up to 100 m are possible.
Dimension (Length x inner width)
standard: 850x850mm; 1500x1250mm
free-size: 750x400mm – 1500x1500mm
Resolution
standard: 1x3000e single range
optional: 2x3000e multi range, 3x3000e multi range, 2x3000e multi interval or 1x6000e single range.
IP Protection
The stainless steel weighing platform is protected according to IP68 and dedicated for use in wet areas.
Overall height
35mm up to 1500x1250mm
45mm up to 1500x1500mm
Material
standard: stainless steel 1.4301 / AISI304
optional: stainless steel AISI 316..
Accessories
ramps, set of foot plates, lifting device, cable IDNet/analog in different lengths.
Surface
optional: ground material: surface roughness <1µm.
Cleaning and service
Thanks to the „open construction“ of many models, cleaning and service are very easy.
Use in hazardous areas
PUA579: category 3G/D
PUA579x: category 2G/D
